FAQ: What Is A Number 7 Bolt On A Ford 1500 Tractor?

How do you read a Ford tractor model number?

The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.

What horsepower is a 8210 Ford tractor?

Ford 8210

Model history
Power hp 110 hp – 81 hp (drawbar) 95 hp (PTO)
Power kW 82 kW
Governed rpm {{{governedrpm}}}
Displacement cu in /(litre) 401 cu inches (6.6 litres)

39 

What HP is a Ford 7000?

Ford 7000

Ford 7000 Power:
Engine (net): 89 hp [66.4 kW]
PTO (claimed): 83 hp [61.9 kW]
Drawbar (tested): 66.66 hp [49.7 kW]
PTO (tested): 83.49 hp [62.3 kW]

32 

How many horsepower is a Ford 3910?

Here is what we know about the Ford 3910 Tractor. It has a 3 cylinder Ford diesel engine that produces 47 horsepower. This Ford tractor is available with optional two wheel drive and four wheel drive models that weigh 4500 pounds.

You might be interested:  How To Remove John Deer Tractor Wheels?

How do you find out what year my Ford tractor is?

How to Date your Ford Tractor

  1. You can learn exactly when your Ford tractor was manufactured.
  2. First, locate the date code.
  3. You should find a series of three codes.
  4. To determine this, look at the tractor production code, also known as the unit date code.
  5. The first digit of the tractor production code gives the production year.

How do I know what Ford tractor I have?

Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.

How fast is a Ford 8210?

18mph top speed on them.

What HP is a Ford 8200?

Ford – 8200

Ford
Displacement 6578
Bore x stroke mm 112×112
Rated Power DIN hp / rpm x
Max. power hp DIN/rpm 110/2300

31 

What HP is a Ford 7810?

Ford 7810

Ford 7810 Power:
PTO (claimed): 90 hp [67.1 kW]
Mechanical:
Chassis: 4×2 2WD
4×4 MFWD 4WD

20 

How many horsepower is a 7600 Ford tractor?

Ford 7600

Ford 7600 Power
Engine (gross): 96.7 hp 72.1 kW
Engine (net): 91 hp 67.9 kW
PTO (claimed): 84 hp 62.6 kW
Drawbar (tested): 65.33 hp 48.7 kW

What weight is a Ford 5000 tractor?

Ford 5000
Length 141.6 inches (360 cm)
Width 68.5 inches (174 cm)
Height 63.5 inches (161 cm) (steering wheel) 86.4 inches (219 cm) (exhaust)
Curb weight 5,865 pounds ( 2,660 kg ) (operating weight) 9,700 pounds ( 4,400 kg ) (ballasted weight)
You might be interested:  FAQ: How Much Air In Tractor Tire?

When was the Ford 7000 made?

The Ford 7000 was built by Ford from 1971 to 1975 in Basildon Essex, in the UK.

Is a Ford 3910 a good tractor?

“I’ve driving some of the new stuff and I admit some newer features are nice but I hate the new high revving engines with small displacements. This tractor has a huge motor for its size thus has tons of low end torque. This is a terrific tractor but I do wear ear protection because it is so loud.”

What HP is a Ford 3000 tractor?

Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.

How many horsepower is a 2910 Ford tractor?

Ford 2910

Ford 2910 Power
Engine (gross): 44 hp 32.8 kW
Engine: 40.5 hp 30.2 kW
PTO (claimed): 36 hp 26.8 kW
Drawbar (tested): 29.09 hp 21.7 kW

Leave a Reply

Your email address will not be published. Required fields are marked *