FAQ: What Size Are The Rear Tires On A 1945 Ford 2n Tractor?

What is the difference between Ford 8N 9N 2N?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

What size are the rear tires on a Ford 8N tractor?

Ford 8N Dimensions

Ford 8N Tires
Ag front: 4.00-19
6.00-16
Ag rear: 10-28
11.2-28

What size tires are on a 9N Ford tractor?

Many 9N tractors had 8″ wide by 32″ rim diameter (8 x 32) rear wheels. Later 9N, 2N, and 8N tractors had 10″ wide by 28″ rim diameter (10 x 28) wheels. The measurements are taken where the bead of the tire contacts the rim.

Which is better 8N or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

How do I know if my Ford tractor is a 2N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N- 2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).

You might be interested:  How To Turn Up Hydraulic Pump On A Mahindra Tractor?

How do you measure offset on a tractor wheel?

To measure wheel offset, there are a few steps. First the wheel flat. Second, using a ruler or straightedge, measure the distance from the floor or ground to the top of the wheel and record that measurement. Next, divide that measurement by 2.

What do the numbers mean on tractor tires?

The three- number lawn tractor tires numbering system works a bit differently. The middle number between the “x” and the “-,” indicates the tire’s width. The final number indicates the width of the rim. Note that the last number is width, not diameter of the rim.

How much HP does a 8N Ford Tractor have?

The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector