FAQ: What Size Tractor Should A Bush Hog 750 Backhoe Use?

What size tractor do I need for a 7 ft bush hog?

Silver Member. Your PTO HP should be 5HP per foot ( width ) for things like a finishing mower, rotary cutter, tiller, etc. So for a 7 ‘ bushhog you should look at least 35HP @ the PTO and for a 9’ bushhog you should look at least 45HP @ the PTO. This is just a general rule of thumb.

How big of a bush hog do I need?

A 5′ wide will probably work for clipping pastures, mowing tall fescue heads and weeds, but not down in the thick stuff or hay. A 4 ‘ wide would probably be better for lower cuts in thick grass, but I just don’t think it will be heavy duty enough for 5’ tall brush and saplings.

How much HP does it take to run a bush hog?

Veteran Member. The rule of thumb is 5 HP per foot of cutter. Thus a 5 foot bush hog requires 25 HP.

You might be interested:  Quick Answer: How To Paint Garden Tractor?

Are 3 point backhoes any good?

But the 3 point one does give a person a way to get the job done. Compared to a shovel they’re GREAT. Compared to a real backhoe they’re slooow. They work pretty good repairing tile or digging up a water hydrant or anything where you need a man sized hole down to 5′ or so.

What size tree can a bush hog cut?

What are the safety precautions and maintenance required to use brush hogs? The blades on a rotary cutter can have top speeds of over 150 miles per hour. Therefore the kinetic energy enables the blades to cut through saplings and small trees up to several inches in diameter.

What size tractor do I need for a 10 foot bush hog?

If you want to use a 10 ‘ lift mount mower you’re going to need a really heavy tractor with good front-end ballast. It will need to have a 3pt hitch lift capacity in the several TON range! You’re probably looking at a tractor around 85-90hp. If you want to get a PULL type mower you could probably get by with less.

How much does a 5 ft Bush Hog weigh?

Specifications

Specification Description
Brand CountyLine
Product Weight 450 lb.
Manufacturer Part Number RC5

Can you bush hog in reverse?

Elite Member. My advice is to remove the FEL (slopes and FEL are a bad combo), mow up the slope in reverse (wont hurt your brush hog as long as you don’t push it into the ground) and mow down the slope in forward, always keep the front of your tractor pointed downhill.

You might be interested:  FAQ: Who Makes The Best Tractor Batteries?

What size tractor do I need to pull a 15 ft batwing?

Rhino and Jd recommend minimum of 55-60 hp for their 15 ‘ batwing mowers.

How much does it cost to bush hog an acre?

For legit bush hogging jobs I usually charge around $100 an acre. For that much acreage I’d give a discount and be around $75 -$80 an acre. You are definitely low-balling yourself.

How long does it take to bush hog 1 acre?

If grass up to waist high with my 40 Hp Tractor and a 5′ bush hog I can do an acre in about 35 minutes. I generally to be safe shoot for 100 per acre in tall grass, but with that kind of volume I would feel safe at 80 per acre. That would be right at $16,000.

How much horsepower does a 6 foot bush hog need?

The general rule of thumb is 5 PTO hp per foot of rotary cutter. So a 6 footer calls for 30 PTO hp or better.

Can you put a backhoe on a tractor?

There are two ways to attach a backhoe to a tractor; some manufactures use the tractors three point hitch attachment while other models use a more integrated frame mounting configuration.

What is the best backhoe to buy?

Best backhoe loaders

  • JCB 1CXT backhoe loader.
  • Caterpillar 434E backhoe loader.
  • JCB 3CX 70th Anniversary backhoe loader.
  • New Holland LB90B backhoe loader.
  • JCB 4CN backhoe loader.

How much can you make with a backhoe?

How Much Do Backhoe Operator Jobs Pay per Hour?

Annual Salary Weekly Pay
Top Earners $62,500 $1,201
75th Percentile $52,000 $1,000
Average $45,331 $871
25th Percentile $34,000 $653

Leave a Reply

Your email address will not be published. Required fields are marked *