FAQ: What Year Ford Tractor Has The Ring Of Stars Badging?

How do I tell what year my Ford tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

What is a 1953 Ford Jubilee tractor worth?

The preauction estimate is $5,000-$7,000 which is not unreasonable. While Golden Jubilee NAA’s aren’t difficult to find they are popular with collectors and in like-new condition can command premium prices.

How do you tell the year of a tractor serial number?

Your serial number should lie between two of the stated numbers. Example: In this example, tractor serial number was 900 was built in 1981 because it is after the first serial number for 1981 but before the first number for 1982. The list only shows the number from the first tractor built in each year.

You might be interested:  Quick Answer: Where To Buy Used Lawn Tractor Cheap?

How do I know what Ford tractor I have?

Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.

How do you read a Ford tractor model number?

The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

What years did Ford make the Jubilee tractors?

Ford NAA tractor
1953 Ford Golden Jubilee
Overview
Manufacturer Ford
Production 1952–1954

13

What is a 1948 Ford 8N tractor worth?

I my area, a decent 8N would go for between $2500 and $3,000.

How do I find out what year my tractor is?

To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1. Per the table below, a 5025 series tractor with a digit of 1 is a model year 2005 tractor.

You might be interested:  Quick Answer: How Much Hp Tractor Do I Need To Lift 1000 Pounds?

How do you tell what year a tractor is by the serial number?

Identify the letter and numbers in positions nine through 12 in a 17-symbol VIN. In order, these identify the security code, calender year of manufacture, transmission code, and wheel or track designation. The calender year of manufacture will be denoted by an A for 2010, B for 2011 and so on.

How do I decode a John Deere serial number?

Identify the next four letters and numbers after the factory code, which will be positions three to six in a 13-symbol VIN, or positions four to seven in a 17-symbol VIN. This is the model number. For instance, in the John Deere VIN CD6068G123456, 6068 is the model number.

What HP is a Ford 600 tractor?

The ” 600 ” and “700” both had around 30 HP on the drawbar with the ” 600 ” set up as a utility or plowing tractor while the “700” was a row crop version with high ground clearance. The “800” and “900” both had around 40 HP with the “900” as the row crop tractor.

What is the difference between a Ford 8N and a Ford 9N tractor?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

Where is the serial number on a 600 Ford tractor?

Left side of tractor (when seated facing forward) just behind starter. There is a flat area with two holes. On the flat area on top there should be two rows of numbers. Top line is model #, bottom line is serial #.

Leave a Reply

Your email address will not be published. Required fields are marked *