How Do I 5ell What Model Ford 2000 Tractor?

How do I tell what model my Ford tractor is?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

How do I tell what year my Ford 2000 tractor is?

How to Date your Ford Tractor

  1. You can learn exactly when your Ford tractor was manufactured.
  2. First, locate the date code.
  3. You should find a series of three codes.
  4. To determine this, look at the tractor production code, also known as the unit date code.
  5. The first digit of the tractor production code gives the production year.
You might be interested:  FAQ: How To Change Oil In Tractor Kioti?

What HP is a Ford 2000 tractor?

Ford 2000

Ford 2000 Power
Engine: 36 hp 26.8 kW
PTO (claimed): 31 hp 23.1 kW
Drawbar (tested): 28.10 hp 21.0 kW
PTO (tested): 32.09 hp 23.9 kW

Where is serial number on Ford 2000 tractor?

Location: Serial number stamped on the top of the starter mount casting, on the left side of the tractor.

How do you read a Ford tractor serial number?

You should see five numbers and digits. The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.

How do you tell what year a tractor is?

The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1.

Where is the serial number on a Ford 4000 tractor?

Location: Serial number stamped into the starter mounting flange on the left side of the tractor.

How do you tell what year a Ford 3000 tractor is?

The Ford 3000 model was made from 1965 thru 1974. The numbers we need to identify your tractor are stamped into the metal on a flat spot just above and behind your starter. Serial number, model number, and date of manufacture. They may be covered with dirt, paint, or rust.

You might be interested:  Readers ask: Zero Turn Tractor Cub Cadet How To Put In Nueutral Cub Cadet?

What year did they make Ford 2000 tractors?

The Ford 2000 tractor was originally produced between 1962 and 1965 out of Highland Park, Michigan.

Does Ford 2000 have live PTO?

Looking at tractordata.com, it looks like all Ford 2000’s should have live pto via 2-stage clutch.

How much oil does a Ford 2000 tractor hold?

Ford 2000 Engine

Engine Oil
Oil capacity: 8 qts 7.6 L

How wide is a Ford 2000 tractor?

Ford 2000, 3000, 4000 & 5000 Tractors General Dimensions

Ford 2000 Ford 4000
To Hood Line 52 ½ in. 57 ½ in.
To Steering Wheel 57 ½ in. 63 in.
Width:
At Minimum Track 63 ⅜ in. 67 ½ in.

11 

How do you read a Massey Ferguson serial number?

VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.

How do you read a tractor serial number?

How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.

How do I tell what year my Ford tractor is?

The easiest way to identify the year of your old Ford tractor is by the serial number. However, sometimes the number is unreadable due to some damage or the engine/transmission has been swapped from another tractor.

Leave a Reply

Your email address will not be published. Required fields are marked *