How To Identify Ford 9n Tractor?

How can you tell the difference between an 8N and 9N Ford tractor?

You can also tell between an 8n and 9n Ford tractors by the positioning of the brake pedal. The 9n has the two brake pedals on opposite sides, so you have a brake pedal close to your right foot and another close to your left foot. On the other hand, the 8n has both brake pedals on the right side.

How do I tell what year my Ford tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

How do you read a Ford tractor serial number?

You should see five numbers and digits. The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.

You might be interested:  Question: Which Side Of Coil Goes To Distributor On 600 6 Volt Tractor?

What year is my Ford 8N tractor?

To determine the year of a Ford 8N tractor, the serial number must be located and then compared to a list of serial numbers used by Ford for each of the years in which the tractor was manufactured. Locate the serial number imprinted on the Ford 8N tractor.

Is a Ford 9N a good tractor?

The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.

What color is a 9N Ford tractor?

All 9N tractors were painted dark grey. This tractor has a rear PTO, which could be used to drive three-point or towed implements.

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

How do you read a tractor serial number?

How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.

You might be interested:  Question: Diesel Ford Tractor Blowing Blue Smoke Why?

Where is the serial number on a Ford 4000 tractor?

Location: Serial number stamped into the starter mounting flange on the left side of the tractor.

How do you read a Massey Ferguson serial number?

VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.

What is the difference between a Ford 9N and 2N?

9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.

What do the numbers on a tractor mean?

The tractor model numbers are comprised of four positions. The first number designates the family while the next three numbers represent the approximate engine horsepower. The fifth and sixth positions are represented by a letter. The second position is the tractor’s approximate engine horsepower.

How do I know what Ford tractor I have?

Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.

What’s an 8N Ford tractor worth?

You might find a good “clean” 8N with a fresh paint for $1800 or a fully redone one for 5k.

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector