Often asked: How Much Horsepower Did A Factory 8n Ford Tractor Come With?

How much horsepower does a Ford 8N tractor have?

The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.

What engine is in a Ford 8N tractor?

Ford N-series tractor
Engine 4 cylinder inline
Transmission 3-speed manual (9N, 2N) 4-speed manual (8N)
Dimensions
Wheelbase 70 in (1,778 mm)

13 

How much is a 1947 Ford 8N tractor worth?

A good running 8N should bring $2k depending on location.

How fast does a Ford 8N tractor go?

8N Tractor Specifications Transmission: Four- speed: 3.23, 4.16, 5.72 and 11.92 mph. Electrics: Ford, six-volt. Tires: 4.00-19 front, 10-28 rear. Weight: 2,700 pounds.

Which is better Ford 8N or 9n?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

You might be interested:  FAQ: How Much Does Discout Tire Charge To Mout A Tractor Tire?

Is the Ford 8N a good tractor?

The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.

What is a 8N Ford tractor worth?

You might find a good “clean” 8N with a fresh paint for $1800 or a fully redone one for 5k.

Can a Ford 8N run a tiller?

TILLER: The ‘N’ tractor WILL NOT RUN A TILLER! Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission. The ground speed is simply too fast without it. Another option if you REALLY must use a tiller with an ‘N’ would be a tiller with its own engine.

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

How much did a Ford 8N tractor cost new?

Ford 8N

Production
Manufacturer: Ford
Factory: Highland Park, Michigan, USA
Total built: 524,000
Original price: $1,404 (1952 )

How do you tell what year a Ford 8N tractor is?

To determine the year of a Ford 8N tractor, the serial number must be located and then compared to a list of serial numbers used by Ford for each of the years in which the tractor was manufactured. Locate the serial number imprinted on the Ford 8N tractor.

You might be interested:  Quick Answer: How Much Horsepower Is 1979 For 16oo Ford Tractor?

Does 8N have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

How much horsepower does a Ford 600 tractor have?

The ” 600 ” and “700” both had around 30 HP on the drawbar with the ” 600 ” set up as a utility or plowing tractor while the “700” was a row crop version with high ground clearance. The “800” and “900” both had around 40 HP with the “900” as the row crop tractor.

What color is a 8N Ford tractor?

Pre and Post 1958. The 8N ” Gray ” has been described as “green/ gray ” or even as “tan”. The color that we use matches the original product.

Leave a Reply

Your email address will not be published. Required fields are marked *