Often asked: What Does A 1955 International 300 Tractor Weigh?

How much does a Farmall 300 tractor weigh?

Farmall 300

Dimensions & Tires
Wheelbase: 92.25 inches 234 cm (tricycle)
96 inches 243 cm (wide-front)
Weight: 5361 lbs 2431 kg
Front tire: 5.50×16

How many horsepower is a International 300 tractor?

International Harvester 300 Utility Tractor is equipped with an International Harvester C169 gasoline 4-cylinder engine, which delivers 38.32 hp (28.6 kW) power at rated rpm 2000.

What is a Farmall 300 worth?

Parts and information are widely available, and the Farmall faithful are always quick to welcome a new member into the fold. For an International 300 in presentable condition, expect to pay upwards of $1,500-$3,000–though as with almost any piece of collectible farm equipment, values are only going up.

How much does an international 1086 weigh?

International Harvester 1086

Production:
106 inches [269 cm] (Hi-Clear)
Weight: 12300 to 13030 pounds
Front tire: 10.00-16
Rear tire: 18.4-38

34 

Is a Farmall 400 a good tractor?

In every important area, the Farmall 400 is the same as the Super M-TA. The tractors share the incredibly reliable and easy to maintain 4.3L 4 cylinder engine, offered in gasoline, diesel and LP gas. This tractor is a great buy. It’s as much as US$4,000 less expensive than the Super M-TA.

You might be interested:  Where Can I Rent Category 1 Implements For A Tractor?

Does a Farmall 300 have a live PTO?

There’s no ” live PTO ” on that tractor.

How many horsepower is a Farmall M?

Farmall M

Farmall M Power
Drawbar (claimed): 25 hp 18.6 kW
Drawbar (tested): 33.1 hp 24.7 kW
PTO (tested): 36.07 hp 26.9 kW
Belt (tested): 36.66 hp 27.3 kW

How much horsepower does a Farmall 350 have?

Farmall 350

Farmall 350 Power:
Drawbar (tested): 35.24 hp [26.3 kW]
Belt (tested): 39.34 hp [29.3 kW]
power test details
Mechanical:

17 

How much horsepower does a Farmall 400 have?

Farmall 400

Farmall 400 Power:
Drawbar (claimed): 37 hp [27.6 kW]
PTO (claimed): 45 hp [33.6 kW]
Drawbar (tested): 48.12 hp [35.9 kW]
Belt (tested): 52.36 hp [39.0 kW]

37 

How much does an international 300 weigh?

International Harvester 300

Dimensions & Tires
Wheelbase: 75 inches 190 cm
Weight: 4,413 lbs 2001 kg
Front tire: 5.50-16
Rear tire: 10.00×28

How wide is a Farmall 300?

Farmall 300 Dimensions

Dimensions
Wheelbase: 92.25 inches 234 cm (tricycle)
Length: 136 inches 345 cm (tricycle)
140 inches 355 cm ( wide -front)
Width: 100 inches 254 cm

How does torque amplifier work?

A torque amplifier is a mechanical device that amplifies the torque of a rotating shaft without affecting its rotational speed. It is mechanically related to the capstan seen on ships. It differs from a torque converter, in which the rotational speed of the output shaft decreases as the torque increases.

What motor is in a 1086 International tractor?

The IH 1086 row-crop tractor used the International Harvester DT414 engine. It is a 6.8 L, 6,784 cm2, (414 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke.

You might be interested:  Often asked: How To Apply For Jobs At Tractor Supply?

How much is an international 1086 worth?

They typically sell for between $8-15,000 here.

What year is a 1086 International?

Specifications

Make: International Model: 1086 Years Made: 1976-1981
Fwd/Rev Standard: 8/4 Fwd/Rev Optional: Mfwd-Std/Opt: OPT
Tires-Std Front: 10.00-16 Tires-Std Rear: 18.4-38 Wheelbase-Inch: 105
Pto Type: IND Pto Speed: 540 1000 CAT I-3pt Hitch: False
CAT II-3pt Hitch: True CAT III-3pt Hitch: True Hitch Lift:

Leave a Reply

Your email address will not be published. Required fields are marked *