Question: How Much Does A 1952 8 N Tractor Way?

How much does a 1952 Ford 8N tractor weigh?

The Ford N-series tractors were a line of farm tractors produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models.

Ford N-series tractor
Wheelbase 70 in (1,778 mm)
Length 115 in (2,921 mm)
Width 64.75 in (1,645 mm)
Curb weight 2,410 lb ( 1,093 kg )

13 

What is a 8 N Ford tractor worth?

To give you an idea how year of manufacture affects value, a 1939-1947 9n/2n in similar condition would have a minimum value of around $500 and an older 8N, around $1000. Very few tractors of this era have values that aproach that of the Ford N’s for two reasons: 3 point hitch and parts availability.

How much was a Ford 8N brand new?

The Ford 8N Tractor Original Price is $1,404 USD (1952 ).

How fast does a Ford 8N tractor go?

8N Tractor Specifications Transmission: Four- speed: 3.23, 4.16, 5.72 and 11.92 mph. Electrics: Ford, six-volt. Tires: 4.00-19 front, 10-28 rear. Weight: 2,700 pounds.

You might be interested:  Often asked: Massey Ferguson 2515 Lawn Tractor Dies When U Let Off Brake?

Does 8N have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

Will an 8N run a tiller?

TILLER: The ‘N’ tractor WILL NOT RUN A TILLER! Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission. The ground speed is simply too fast without it.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

How much is a 1948 Ford 8N worth?

I my area, a decent 8N would go for between $2500 and $3,000.

Which is better Ford 8N or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

How much horsepower does a 1952 Ford 8N have?

Ford 8N

You might be interested:  FAQ: What Makes My Lawn Tractor Oil Black?
Ford 8N Power
Drawbar (claimed): 23.16 hp 17.3 kW
PTO (claimed): 27.32 hp 20.4 kW
Drawbar (tested): 21.95 hp 16.4 kW
PTO (tested): 23.24 hp 17.3 kW

What motor is in a Ford 8N tractor?

The 8N features a four-cylinder, eight-valve engine with 120 cubic inches (ci) of displacement. The engine features 3.188 inches of bore and 3.75 inches of stroke with a 6-to-1 or 6.7-to-1 compression ratio, depending on the year. The 8N features a 23.22 belt horsepower with a 27.32 maximum.

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

How much horsepower does a Ford 600 tractor have?

The ” 600 ” and “700” both had around 30 HP on the drawbar with the ” 600 ” set up as a utility or plowing tractor while the “700” was a row crop version with high ground clearance. The “800” and “900” both had around 40 HP with the “900” as the row crop tractor.

How much can a 8N pull?

How much can a Ford 8n pull? Here is what we know about the Ford 8N Tractor. It has a 4 cylinder Ford gas Engine and is available in two wheel drive weighing up to 4043 pounds.

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector