Question: How To Buy A Ford N-series Tractor?

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

What is the difference between a 2N and a 8N Ford tractor?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

How do I know if my Ford tractor is a 2N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N- 2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).

You might be interested:  Often asked: What Does A Typical Lawn Tractor Weigh?

What’s the difference between a 2N and a 9N Ford tractor?

9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.

What is a 1948 Ford 8N tractor worth?

I my area, a decent 8N would go for between $2500 and $3,000.

How much horsepower does a Ford 2N tractor have?

Ford 2N

Ford 2N Power
Drawbar (claimed): 12 hp 8.9 kW
PTO (claimed): 23 hp 17.2 kW

Which is better Ford 8N or 9n?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

How do you find out what year my Ford tractor is?

How to Date your Ford Tractor

  1. You can learn exactly when your Ford tractor was manufactured.
  2. First, locate the date code.
  3. You should find a series of three codes.
  4. To determine this, look at the tractor production code, also known as the unit date code.
  5. The first digit of the tractor production code gives the production year.
You might be interested:  FAQ: How Much Pitch Do You Need On A Manual Soil Sifter For A Tractor?

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

Is a Ford 9n a good tractor?

The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.

What type of oil does a Ford 9N tractor take?

I’d say any good brand of 15W 40 would do. Most snake oil /additives will do no harm to your engine.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

Does 8N have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

Leave a Reply

Your email address will not be published. Required fields are marked *