Question: How To Find Model Number On Old Ih 340 Tractor Loader?

How do I find the model of my tractor?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

How do you read a tractor serial number?

How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.

How do I find out what year my international tractor is?

When you want to identify the year of your tractor, you can look at several things. First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.

You might be interested:  How To Tell If A Coil On A Tractor Is Working?

How much horsepower does a 340 International tractor have?

International Harvester 340

International Harvester 340 Power:
Engine: 47 hp [35.0 kW]
Gas Drawbar (claimed): 32.4 hp [24.2 kW]
Diesel Drawbar (claimed): 36 hp [26.8 kW]
Gas PTO (claimed): 35.2 hp [26.2 kW]

28

How do you find the year of a tractor serial number?

To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1. Per the table below, a 5025 series tractor with a digit of 1 is a model year 2005 tractor.

How do I identify my old tractor?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).

How do you read a Massey Ferguson serial number?

VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.

Where can I find serial number?

Android tablet Settings feature

  1. Option one: Open Settings > About Tablet > Status > Serial Number.
  2. Option two: For most products, the serial number can be viewed at the bottom of the device back cover.

How do I decode a John Deere serial number?

Identify the next four letters and numbers after the factory code, which will be positions three to six in a 13-symbol VIN, or positions four to seven in a 17-symbol VIN. This is the model number. For instance, in the John Deere VIN CD6068G123456, 6068 is the model number.

You might be interested:  Quick Answer: How To Attach Sway Bars On Tractor?

How do I identify an international v8 engine?

Look for the distributor at the front of the engine. The distributor has a plastic cap with wires running to the individual spark plugs at each cylinder. All International V-8s have the distributor located at the front of the engine, whereas most V-8 distributors are located towards the rear of the engine.

How do I identify my Ferguson tractor?

Locate the serial number by checking the lower left-hand side and lower right-hand side of the steering wheel panel. In addition, certain older Ferguson tractors have the serial number stamped to a plate mounted to one of these areas of the steering wheel panel.

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector