Quick Answer: What Size Sleeves Does My Ford 9n Tractor Have?

What is the difference between a Ford 8N and 9N tractor?

The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a ‘Position-control’ setting for the hydraulics.

How do I identify a Ford 9N tractor?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

What is the difference between a Ford 9N and 2N?

9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.

You might be interested:  Quick Answer: Where Is The Serial Number Located On A David Brown 1210 Tractor?

How do you read a Ford tractor model number?

The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.

Is a Ford 9N a good tractor?

The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.

How do you tell what year a 9N Ford tractor is?

The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N -2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

What horsepower is a Ford 9N tractor?

Ford 9N

Ford 9N Power
Drawbar (claimed): 12.68 hp 9.5 kW
Belt (claimed): 20.29 hp 15.1 kW
Plows: 2 (14-inch)
Drawbar (tested): 16.31 hp 12.2 kW

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

You might be interested:  Question: How To Repair Rotten Seat Pan Tractor?

How do you tell what year a tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

Does 8n have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

How do you read a tractor serial number?

How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.

How do you read a Massey Ferguson serial number?

VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.

You might be interested:  Often asked: How To Add Second Fuel Filter To Tractor?

What is the weight of a Ford 4000 tractor?

Ford 4000

Dimensions & Tires
Wheelbase: 84.5 inches 214 cm
Weight: 4,885 lbs 2215 kg
Front tire: 6.00-16
Rear tire: 12.4-38

Leave a Reply

Your email address will not be published. Required fields are marked *