Quick Answer: What Size Tractor Do I Need For A Jd 1770?

How big of a tractor do I need to pull a 16 row planter?

A 150 hp tractor will handle the 16 row, but may need mfd for weight up front, when planter is in transport position.

How big of a tractor do I need to pull a 24 row planter?

Pulling a 24 – row planter, “we need a 310-horsepower tractor at 7 to 7 1/2 mph.

What size tractor do I need to pull a 12 row planter?

Tractors needed depend a lot on types of tillage operations (or lack thereof), fertilizer application, etc. To just pull a 12 row planter would require a tractor of about 120 hp (depending on attachments etc.)

How much horsepower does it take to pull a 6 row planter?

As per the 1225 (replacement planter for 1200) brochure the minimum PTO HP for a 6 row planter is 75 HP. A 766 would just meet this requirement if you have no hills.

You might be interested:  Readers ask: How Much Does A S&h Tractor Mechanic Make?

How much horsepower do you need to pull an air seeder?

With the drill, it would need another 3.5 to four h.p. per opener, or 300 to 375 h.p. for an 84 foot toolbar.

How much horsepower does it take to pull an 8 row planter?

We pulled an 8 rn planter for years and years with a 70-75 HP 706 IH. You should be fine with any of your options. No issues on HP with any of them. If you feed on any hills, I would avoid feeding on narrows.

How much horsepower does it take to pull a no till drill?

Transporting Drill The JD 1590 No – Till Drill weighs approximately 7,500 lbs. Movement of the drill requires a tractor or truck equipped with a hitch with adequate towing capacity. Manufacturer recommends a minimum 85 PTO horsepower tractor.

How much horsepower does it take to pull a 20 foot disc?

Subject: RE: Typical Hp requirements for a 20 foot disk? 150 is plenty. 120 would even do it. In a pinch I’ve used my 7710 MFWD Ford to pull my 22ft 490 it was a load but it would pull it.

How much horsepower does it take to pull a 24 foot disc?

Better to have too much than too little, right? Around here a 24 ‘ cutting disc in tough conditions would require a 4840, in normal conditions a 4640 would pull it.

How wide is a 12 row planter?

Call Us

Key Specs:
Dimensions:
Transport width (with markers) 3494 mm 137.56 in.
Transport length 9197 mm 362 in.
Transport height 3487 mm 137.3 in.
You might be interested:  Question: How Many Ply Tractor Tire?

47 

How much horsepower does a row planter have?

10 hp per row seems pretty good figure fir a regular row unit up to 12 rows. Then you can probably go to 5-7 hp per row.

Leave a Reply

Your email address will not be published. Required fields are marked *