Quick Answer: Where To Buy Parts For Ford 3000 Farm Tractor?

Is Ford 3000 a good tractor?

A 3000 is one of the best small tractors ever built by any brand or color of that era. They are absolutely bulletproof. Good parts availability – both new and used, not hard to work on. They are nimble – especially with power steering, have an excellent power to weight ratio and shucky- darn, are just fun to drive.

How much horsepower does a Ford 3000 tractor have?

Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.

How do I tell what year my Ford 3000 tractor is?

The Ford 3000 model was made from 1965 thru 1974. The numbers we need to identify your tractor are stamped into the metal on a flat spot just above and behind your starter. Serial number, model number, and date of manufacture. They may be covered with dirt, paint, or rust.

You might be interested:  How Fast Can A Farming Tractor Go?

What kind of oil does a Ford 3000 tractor take?

SAE 5w-20 below 14 degree F up to 40.

How heavy is a Ford 3000 tractor?

Ford 3000 Dimensions

Ford 3000 Weight
Shipping: 3,700 lbs 1678 kg
Operating: 4,185 lbs 1898 kg
Ballasted: 6,940 lbs 3147 kg

Are Ford tractors any good?

In my experience they were good, reliable tractors as long as you didn’t use the dual power too much. In my opinion the dual power was about like the TA on the IH tractors. It was good when it worked but expensive to fix when it didn’t.

Is a Ford 4000 a good tractor?

A ford 4000 is an excellent fit for you, but all the troubles this tractor has are disturbing. I get the impression that he hasn’t taken good care of this tractor or perhaps it has been sitting for a while, maybe he’s fixing it up for sale.

What year is Ford 3000?

The Ford 3000 is a tractor that was introduced by Ford in the spring of 1965. It was part of Ford’s Thousand Series of tractors. This was a “ground up” new platform designed to replace the “Prior” or “Hundred Series” Fords built from 1955 through 1964. It has a 3-cylinder OHV, water-cooled engine.

What horsepower is a 5000 Ford tractor?

It has a 4 cylinder Ford diesel engine or gasoline engine that produce 69 horsepower and has two wheel drive and four wheel drive models that weigh up to 9700 pounds. View the Ford 5000 specs below. The Ford 5000 tractor has a category 1 and 2 three point hitch and a claimed pto of 53.09 hp.

You might be interested:  Quick Answer: What Tire For Garden Tractor Trailer?

How can I tell how old my Ford tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

How do you tell the year of a tractor serial number?

Your owner’s manual contains information on how to locate all the identification numbers. The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below.

How do I know what Ford tractor I have?

Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.

How much compression should a Ford 3000 tractor have?

Compression ratio, 7.75:1. ENGINE, diesel -Type, in-line vertical, direct injection, with cold starting aid.

How much hydraulic fluid does a Ford 3000 tractor take?

According to the owner’s manual, both the 6 and 8 speed transmissions on a 3000 should take 13.4 U.S. quarts, which is a little under 4.5 gallons, so it was definitely overfilled.

How many quarts does a Ford 3000 tractor hold?

Ford 3000 – engine

Engine Detail: Ford gasoline 3-cylinder liquid-cooled 158 ci [2.6 L]
Bore/Stroke: 4.20×3.80 inches [107 x 97 mm]
Starter volts: 12
Oil capacity: 8 qts [7.6 L]
Coolant capacity: 13.8 qts [13.1 L]
You might be interested:  Question: How To Check The Engine Compression On A Farmall Super A Tractor?

31 

Leave a Reply

Your email address will not be published. Required fields are marked *