Readers ask: How Much Are 9n Ford Tractor?

What is a 2N Ford tractor worth?

The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.

Are Ford 9N Tractors good?

There has been a 9N in my family for almost 45 years and has been used for all kinds of work.It is a damn good tractor and will still be around after everybody on this list is long dead.

Which is better Ford 8n or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

How much did a Ford 8n tractor cost new?

Ford 8N

You might be interested:  Question: How To Rebuild A Gravley Tractor Carburetor?
Production
Manufacturer: Ford
Factory: Highland Park, Michigan, USA
Total built: 524,000
Original price: $1,404 (1952 )

How do I know if my Ford tractor is a 2N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N- 2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).

How much horsepower does a Ford 9N tractor have?

The 9N weighed 2340 pounds and had 13 drawbar horsepower, which could pull a two-bottom plow. It was designed to be safe, quiet and easy to operate.

What is the difference between a Ford 9N and 2N?

9N and 2N tractors had a 3-speed. The hydraulic 3-point arms have a halfway position between fully “up” and “down”. 9N and 2N tractors only had draft control. Both brake pedals are on the same side – 9N and 2N tractors were split.

Does Ford 601 have live PTO?

It does have live hydro but does not have live pto. It has four forward gears..

How much weight can a Ford 8n pull?

The tractor weight according to the 8n manual is 2400+ pounds (I’d have to go get the manual to find the exact weight). This is without any fuel, oil or calcium in the tires. 3) you are risking damage to the trailer and a potential accident as a result.

Is a Ford 8N a good tractor?

The laws of supply and demand really work for you with an 8N tractor! With so many of these machines still in use, the price and availability of parts can’t be beat. You can have a lot of fun with a Ford 8N, too! If you are looking for an inexpensive, rugged, reliable tractor for basic chores, the 8N can’t be beat.

You might be interested:  Quick Answer: Utube How To Change Rear Brake Pad On Toro 522xi Series Tractor?

Does Ford 8N tractor have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

What years did Ford make 8N tractors?

The Ford 8N tractor was introduced in 1947, and 442,035 were built between then and 1952. The majority of them are still running. The 8N was the last of a series of tractors —the N-series—built by Ford starting in 1939, the first two being the 9N, made through 1942, and its successor the 2N, built through 1947.

Can a Ford 8N run a tiller?

TILLER: The ‘N’ tractor WILL NOT RUN A TILLER! Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission. The ground speed is simply too fast without it. Another option if you REALLY must use a tiller with an ‘N’ would be a tiller with its own engine.

Does Ford still make tractors?

Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.

What year did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

Leave a Reply

Your email address will not be published. Required fields are marked *