Readers ask: Wizars Lawn Tractor 9191a89 How To Change Ground Drive V Belt On Old Craftsman?

How do you tighten the belt on a Craftsman riding lawn mower?

Push the belt keepers on the transaxle pulley down and slide the belt over the transaxle pulley. Pull the slack from the back of the tractor (transaxle pulley) and slide the belt on to the stationary and clutch idlers. This will increase the tension in the belt and hold it in place.

What size belt goes on a Craftsman 42 inch deck?

174883. AYP / Craftsman / Sears Deck Drive Belt fits 42 ” cut (2002-2003). Size: 5/8″ x 97″. Replaces part number 174883.

How long is a 42 deck belt?

Dimensions:

Dimensions:
Length: 101.5 (in.)
Width: 0.5 (in.)

Why does my drive belt keep coming off my riding mower?

The drive belt may come off a riding mower because it is damaged or loose. When loose, the belt may slip, resulting in friction that, if it creates enough heat, can lead to a fire in the mower’s engine.

What is a ground drive belt?

The ground drive belt connects the engine crankshaft to the transaxle pulley to drive the rear wheels. If the belt breaks, the lawn tractor won’t move. If the belt is worn, the lawn tractor moves sluggishly because the belt slips on the pulley.

You might be interested:  Question: How To Pull Steering Wheel On Jd 180 Lawn Tractor?

How do you tighten a drive belt on a countax?

To correct the tension, follow this procedure:

  1. Release the tension on the belt by pulling the Belt.
  2. Taking care not to burn yourself on a hot exhaust, locate.
  3. Remove the Spring Clip and washer holding the.
  4. Both the Trunnion and the Belt Tension Rod are.
  5. Having made the adjustment, re-locate and secure the.

Leave a Reply

Your email address will not be published. Required fields are marked *