What Is A Catagory 1,2 Pr Three Tractor?

What is a Category 3 tractor?

Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.

What is a Category 1 or 2 tractor?

Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.

What is a Category 2 tractor?

What are the 3-point hitch categories?

Category Tractor Power Lift arm pin diameter
1 20-45 HP 7⁄8 in (22 mm)
2 40-100 HP 1 1⁄8 in (29 mm)
3 80-225 HP 1 7⁄16 in (37 mm)
4 More than 180 HP 2 in (51 mm)

1

What is the difference between a Category 1 and 2/3 point hitch?

The 3 – point hitch comes in 5 different sizes, numbered from 0 to 4. The differences between them are the dimensions of the triangle and the size of the three connecting pins. The lower lift arms on a 3ph cat 1 are 26″ wide, with the top link being 18 inches above the center line, between the two lower lift arms.

You might be interested:  FAQ: What Type Of Oil To Use In Diesel Tractor?

What is the difference between category 0 and 1 hitch?

differences, as one goes up in Category implements the fabrication us usually more robust and can handle more tractor horsepower. In your case a Category 0 implement would probably be lighter weight than a Category 1 even though both are 48″. More weighty material & heftier fabrication = $200.

What is a 3 point drawbar used for?

They come in real handy for skidding logs as you can lift the front of the log log up over obstacles. Also for trailer jockeying, having the hitch on the 3pt makes coupling trailers easy.

What is the difference between Category 1 and Category 2?

Category 1 is for those who got ranks between 1 – 20k. They pay around 1.5 lakh per year as fees. It is the general merit list. Category 2 is for 20k to 40k rank.

What is a 2 point hitch?

The planter 2 – point hitch provides a reliable, simple, and secure method for tractor attachment. This hitch design utilizes the tractor’s Category 3 or 4N quick- hitch for fast, one-person hookup. The offset crossbar allows an operator to move the planter over 7.5-in. by changing an attaching pin location.

What size are CAT 2 pins?

Specifications

Specification Description
Hitch Category 1 to 2
Material Pin and Nut SAE1010-1020, Washer- Spring Steel
Pin Diameter 7/8 in.
Pin Length 5 in.

15

How much weight can a 3 point hitch lift?

Registered. Specs say the 3 pt hitch can lift 681 lbs 24″ behind the links.

What size is CAT 1 3 point hitch?

Three-point hitch specifications

Category Hitch pin size
1 19 mm ( 3 ⁄4″) 22.4 mm (7⁄8″)
2 25.5 mm ( 1 “) 28.7 mm ( 1 1 ⁄8″)
3 31.75 mm ( 1 1 ⁄4″) 37.4 mm ( 1 7⁄16″)
4 45mm ( 1 3 ⁄4″) 51 mm (2″)
You might be interested:  FAQ: How To Polarize A 6 Volt Positive Ground Generator Ford Jubille Tractor?

2

Does a three point hitch have down pressure?

A 3 point hitch usually does not have down pressure. The reason being down pressure would unload the rear wheels, which would have you going nowhere fast. The weight of the PHD should be enough to start the auger into the dirt.

How wide is a 3 point hitch?

Category 2 Category 3
Lower link hole diameter 28.70 mm (1.13 in.) 37.34 mm (1.47 in.)
Lower hitch point Span (1) 825 mm (32.48 in.) 964.95 mm (37.99 in.)
Width of ball (2) 44.96 mm (1.77 in.) 44.96 mm (1.77 in.)
Pin centerline – Lower to upper (3) 610.11 mm (24.02 in.) 685.04 mm (26.97 in.)

3

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock
detector