What Model Ford Is My Tractor?

How can you tell the difference between a Ford 2N and 9N?

Both brake pedals are on the same side – 9N and 2N tractors were split. That being said, here are some clues that can help in most cases:

  1. If the tractor has a cast aluminum hood and/or a starter switch on the right side of the dash, congratulations!
  2. Tubular radius arms indicate a 2N produced after mid-1944.

How do you read a tractor serial number?

How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.

How do I identify a Ford 3000 tractor?

The Ford 3000 model was made from 1965 thru 1974. The numbers we need to identify your tractor are stamped into the metal on a flat spot just above and behind your starter. Serial number, model number, and date of manufacture. They may be covered with dirt, paint, or rust.

You might be interested:  How To Install 12.4x16 Tractor Tire Chains?

How do you tell what year a Ford tractor is?

To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.

Which is better 8N or 9N?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

How do you read a Massey Ferguson serial number?

VIN number on right hand chassis rail. Top line: digits 1 to 9 from the VIN between 2 inverted triangles. Bottom line: digits 10 to 17 between 2 inverted triangles. Prior January 1st 2016, the serial number plate is located just below the rear inspection window, except for the MF5600, 6600, 7600 & 8600 series tractors.

How do you find the year of a tractor serial number?

To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1. Per the table below, a 5025 series tractor with a digit of 1 is a model year 2005 tractor.

How do I identify my Ferguson tractor?

Locate the serial number by checking the lower left-hand side and lower right-hand side of the steering wheel panel. In addition, certain older Ferguson tractors have the serial number stamped to a plate mounted to one of these areas of the steering wheel panel.

You might be interested:  FAQ: How Wide Is A 18 Wheeler Tractor?

How many horsepower is a 3000 Ford tractor?

Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.

Is Ford 3000 a good tractor?

A 3000 is one of the best small tractors ever built by any brand or color of that era. They are absolutely bulletproof. Good parts availability – both new and used, not hard to work on. They are nimble – especially with power steering, have an excellent power to weight ratio and shucky- darn, are just fun to drive.

How do I find out what year my international tractor is?

When you want to identify the year of your tractor, you can look at several things. First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.

Where is the serial number on a 600 Ford tractor?

Left side of tractor (when seated facing forward) just behind starter. There is a flat area with two holes. On the flat area on top there should be two rows of numbers. Top line is model #, bottom line is serial #.

What HP is a Ford 600 tractor?

The ” 600 ” and “700” both had around 30 HP on the drawbar with the ” 600 ” set up as a utility or plowing tractor while the “700” was a row crop version with high ground clearance. The “800” and “900” both had around 40 HP with the “900” as the row crop tractor.

You might be interested:  FAQ: How To Check Ballest Resister On 8n Tractor?

When did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

Leave a Reply

Your email address will not be published. Required fields are marked *